Buy Online Pick Up In-store
Error Storing Vehicle
directions_car close
menu
keyboard_arrow_right
keyboard_arrow_right
21 Results
Part # BA6
SOLAR
$65.99
100-1200 cca electronic battery & system tester
100-1200 cca electronic battery & system tester
The BA6 Battery and System Tester features an operating range of 4.5-16V and is optimized to test six distinct battery types: Conventional Flooded Acid, AGM Flat Plate, AGM Spiral Wound, Start-Stop AGM, Start-Stop Enhanced Flooded and Gel Cell batteries. It also features the convenience of starting and charging system testing, offering quick assessment and providing both a numerical result and a pass/fail result. The BA6 has a testing range of 100-1200 CCA, covering everything from powersport to Group 31 batteries. It is capable of testing batteries per the CCA and CA standards. It features an LCD display that offers a high level of detail throughout the testing process and improved viewing in bright sunlight. It also features reverse polarity protection to avoid damage from reverse hookups and over-voltage protection.
help
Not Fitted / Universal
Part # BA227
SOLAR
$259.99
100-1400 cca electronic battery & system tester w/printer
100-1400 cca electronic battery & system tester w/printer
The BA227 offers a complete testing solution for 12 Volt batteries and systems. Features an operating range from 6.5-15V and a testing capacity from 100-1400 CCA. Compatible with a wide variety of battery types, the BA227 is designed to test flooded, AGM flat plate, spiral wound, gel cell, start-stop AGM and enhanced flooded batteries. It features 36" cable leads, replaceable cable ends, temperature compensation and an easy-to-use interface. It features an LCD display that offers a high level of detail throughout the testing process and improved viewing in bright sunlight. It also features reverse polarity protection to avoid damage from reverse hookups and over-voltage protection.
help
Not Fitted / Universal
Part # PL4050
SOLAR
$219.99
12v 4x5a pro-logix 4-bank battery maintenance station
12v 4x5a pro-logix 4-bank battery maintenance station
Model PL4050 is a perfect charger to meet the needs of mechanical repair shops, collision repair facilities, fleet operations, marinas and consumers. It features four independent output channels designed to properly charge a flooded or AGM (including Sprial Wound) battery. Because each output is independent of the others, a troublesome battery on one channel does not create problems for the other channels. The unit features three channels with 12V output and one channel with 6/12V output. It combines fully automatic operation with the ability to properly charge multiple battery types. Advanced charging logic, robust components, quick set-up and smart display feedback mean effective and efficient charging for your operation.
help
Not Fitted / Universal
Part # PL6100
SOLAR
$779.99
12v 60/40/10a pro-logix battery charger w/100a power supply
12v 60/40/10a pro-logix battery charger w/100a power supply
The PL6100 is designed to provide stable power, on demand up to 100 amps, to a vehicle electrical system to support module reprogramming. It also provides full service battery charging capability from 10 to 60 amps, to service everything from small vehicle batteries to Group 31 batteries. In power supply mode, the PRO-LOGIX PL6100 provides power to maintain vehicle electrical system voltage at a preset level, increasing its output in response to system load increases to maintain a stable power environment for successfully reprogramming. It features a voltage output range of 13.1-14.9V, adjustable in 0.1V increments. allowing the operator to dial the output in exactly as specified by the supplier of the vehicle under service. It features fast load responsiveness for ultra-quick recovery from system demand increases. It also delivers its massive power with minimal voltage ripple, providing a clean flow of power to the vehicle without risk of programming interference. In charging mode, the PL6100 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery or battery pack serviced. The PL6100 features the ability to properly charge a wide variety of lead acid battery types, including Conventional, AGM, Spiral Wound, Start-Stop, Deep Cycle and Marine batteries ? for virtually any lead acid battery type installed in a vehicle, the PL6100 can deliver a proper, beneficial charge. The PL6100 adapts its charging approach based on the needs of each battery or battery pack it services. Such adaptations can include activating a soft start mode on deeply discharged batteries, a battery repair mode on older/distressed batteries and temperature compensation when charging in extreme temperatures. It also incorporates numerous features to make charging safer for the operator and the vehicle/battery being charged.
help
Not Fitted / Universal
Part # PL6800
SOLAR
$779.99
12v 100/40/10a pro-logix fleet charger w/100a power supply
12v 100/40/10a pro-logix fleet charger w/100a power supply
The PL6800 is designed to provide stable power, on demand up to 100 amps, to a vehicle electrical system to support module reprogramming. It is also designed specifically for fleet service battery charging with a maximum charge rate of 100 amps, to quickly and effectively bring 4- and 8-battery Group 31 packs back to full charge. In power supply mode, the PRO-LOGIX PL6800 provides power to maintain vehicle electrical system voltage at a preset level, increasing its output in response to system load increases to maintain a stable power environment for successfully reprogramming. It features a voltage output range of 13.1-14.9V, adjustable in 0.1V increments. allowing the operator to dial the output in exactly as specified by the supplier of the vehicle under service. It features fast load responsiveness for ultra-quick recovery from system demand increases. It also delivers its massive power with minimal voltage ripple (<100mV), providing a clean flow of power to the vehicle without risk of programming interference. In charging mode, the PL6800 utilizes advanced microprocessor-controlled logic to precisely deliver a fully automatic charging routine designed to optimally charge and maintain each battery or battery pack serviced. The PL6800 features the ability to properly charge a wide variety of lead acid battery types, including Conventional, AGM, Spiral Wound, Start-Stop, Deep Cycle and Marine batteries ? for virtually any lead acid battery type installed in a vehicle, the PL6100 can deliver a proper, beneficial charge. The PL6800 adapts its charging approach based on the needs of each battery or battery pack it services. Such adaptations can include activating a soft start mode on deeply discharged batteries, a battery repair mode on older/distressed batteries and temperature compensation when charging in extreme temperatures. It also incorporates numerous features to make charging safer for the operator and the vehicle/battery being charged.
help
Not Fitted / Universal
Part # PL3760
SOLAR
$509.99
12/24v 60a pro-logix wheel charger with engine start
12/24v 60a pro-logix wheel charger with engine start
Combining fully automatic operation and the ability to properly charge multiple battery types, the PRO-LOGIX PL3760 is the perfect charger to meet the needs of today?s and tomorrow?s professional technician. Intelligent, beneficial, safe and versatile ? one charger does it all, from fast charging and battery repair to engine starting assistance and stable power mode for system diagnosis, repair and programming. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL3760.
help
Not Fitted / Universal
Part # HT1224AGM
SOLAR
$2,329.99
Heavy truck jump starter 12/24v (agm batteries installed)
Heavy truck jump starter 12/24v (agm batteries installed)
The "Big Boy" of wheeled jump starting units has gotten an upgrade: features installed AGM batteries to increase unit longevity and eliminate spill hazards. Specifically designed for over-the-road transportation and heavy-duty implements starting applications. It exceeds the challenges of frigid weather and delivers the instant raw power of 1400 cold cranking amps in 12 Volt mode and 800 cold cranking amps in 24 Volt mode. Features 10 ft cable leads made of 1/0 cable to reach the starting points on vehicles of all shapes and sizes.
help
Not Fitted / Universal
Part # CS1000
SOLAR
$37.00
Vehicle jump starter
Vehicle jump starter
help
Not Fitted / Universal
Part # BA7
SOLAR
$79.99
100-1200 cca electronic battery & system tester
100-1200 cca electronic battery & system tester
SOLAR battery chargers, battery testers, power inverters and commercial jump starting equipment serve the needs of busy professionals around the world. PRO-LOGIX battery chargers by SOLAR deliver advanced technology to the battery charging application, offering fully automatic operation, temperature compensation, the ability to properly charge all lead acid battery types and unsurpassed safety for the operator and the equipment being charged. Founded in 2001, but with an over 50 year heritage, Clore Automotive is a leader in the design, development and manufacture of automotive service equipment for professionals and consumers.
help
Not Fitted / Universal
Part # PL2310
SOLAR
$74.99
6/12v 10 amp pro-logix automatic battery charger
6/12v 10 amp pro-logix automatic battery charger
Combining fully automatic operation and the ability to properly charge multiple battery types, the PRO-LOGIX PL2310 is the perfect charger to meet the needs of today?s and tomorrow?s professional technician. Intelligent, beneficial, safe and versatile ? one charger does it all, from fast charging and battery repair to battery maintenance and long term storage charging. Plus, with the ability to properly charge virtually any lead acid battery type, it is the only charger you will need. Flooded, AGM, Gel Cell, Spiral Wound, Marine and Deep Cycle batteries all can be charged right with the PL2310.
help
Not Fitted / Universal
Part # PI5000X
SOLAR
$80.99
500w power inverter, dual outlet plus usb
500w power inverter, dual outlet plus usb
The PI5000X is great for powering electronic devices and small appliances. It features two AC outlets and one USB outlet. Includes two means of connecting to a 12V power supply, 12 Volt outlet plug or battery clamps, enabling the operator to choose the option that best fits their application.
help
Not Fitted / Universal
Part # PL3730
SOLAR
$329.99
6/12v 60/40/15/5/275a pro-logix wheel battery charger
6/12v 60/40/15/5/275a pro-logix wheel battery charger
SOLAR battery chargers, battery testers, power inverters and commercial jump starting equipment serve the needs of busy professionals around the world. PRO-LOGIX battery chargers by SOLAR deliver advanced technology to the battery charging application, offering fully automatic operation, temperature compensation, the ability to properly charge all lead acid battery types and unsurpassed safety for the operator and the equipment being charged. Founded in 2001, but with an over 50 year heritage, Clore Automotive is a leader in the design, development and manufacture of automotive service equipment for professionals and consumers.
help
Not Fitted / Universal
Parts Catalog
keyboard_arrow_upBack to Top