With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over 1 degree
These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over 1 degree
These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over 1 degree
These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over 1 degree
Restore lost toe adjustment on many popular Subaru models with this replacement bolt and bushing kit. Many times the factory bolt freezes inside the control arm bushing and has to be cut out. This kit includes a replacement factory style toe cam and bushing so you can get the job done and bring rear toe back into specification.
Restore lost toe adjustment on many popular Subaru models with this replacement bolt and bushing kit. Many times the factory bolt freezes inside the control arm bushing and has to be cut out. This kit includes a replacement factory style toe cam and bushing so you can get the job done and bring rear toe back into specification.
Restore lost toe adjustment on many popular Subaru models with this replacement bolt and bushing kit. Many times the factory bolt freezes inside the control arm bushing and has to be cut out. This kit includes a replacement factory style toe cam and bushing so you can get the job done and bring rear toe back into specification.
Restore lost toe adjustment on many popular Subaru models with this replacement bolt and bushing kit. Many times the factory bolt freezes inside the control arm bushing and has to be cut out. This kit includes a replacement factory style toe cam and bushing so you can get the job done and bring rear toe back into specification.
GM's HiPer strut has been released on several Buicks and Cadillacs. To adjust front camber you must adjust a cam bolt on knuckle assembly. However, GM is using torque-to-yield bolts which require replacement whenever an alignment is performed. Replace the OE 10.9 Grade torque-to-yield bolts with SPC's upgraded 12.9 bolts and you will not need to replace the bolt for future alignments. The kit includes 2 bolts; a cam bolt for the slotted upper and a standard replacement bolt for the lower hole, enough toalign one corner.
GM's HiPer strut has been released on several Buicks and Cadillacs. To adjust front camber you must adjust a cam bolt on knuckle assembly. However, GM is using torque-to-yield bolts which require replacement whenever an alignment is performed. Replace the OE 10.9 Grade torque-to-yield bolts with SPC's upgraded 12.9 bolts and you will not need to replace the bolt for future alignments. The kit includes 2 bolts; a cam bolt for the slotted upper and a standard replacement bolt for the lower hole, enough toalign one corner.
GM's HiPer strut has been released on several Buicks and Cadillacs. To adjust front camber you must adjust a cam bolt on knuckle assembly. However, GM is using torque-to-yield bolts which require replacement whenever an alignment is performed. Replace the OE 10.9 Grade torque-to-yield bolts with SPC's upgraded 12.9 bolts and you will not need to replace the bolt for future alignments. The kit includes 2 bolts; a cam bolt for the slotted upper and a standard replacement bolt for the lower hole, enough toalign one corner.
GM's HiPer strut has been released on several Buicks and Cadillacs. To adjust front camber you must adjust a cam bolt on knuckle assembly. However, GM is using torque-to-yield bolts which require replacement whenever an alignment is performed. Replace the OE 10.9 Grade torque-to-yield bolts with SPC's upgraded 12.9 bolts and you will not need to replace the bolt for future alignments. The kit includes 2 bolts; a cam bolt for the slotted upper and a standard replacement bolt for the lower hole, enough toalign one corner.
This new kit allows for easy adjustment of the lower control arm to make camber and caster changes. Uses the O.E. bolts with the new cams and adjusting plates to give you lifetime camber and caster adjustments.
This new kit allows for easy adjustment of the lower control arm to make camber and caster changes. Uses the O.E. bolts with the new cams and adjusting plates to give you lifetime camber and caster adjustments.
This new kit allows for easy adjustment of the lower control arm to make camber and caster changes. Uses the O.E. bolts with the new cams and adjusting plates to give you lifetime camber and caster adjustments.
This new kit allows for easy adjustment of the lower control arm to make camber and caster changes. Uses the O.E. bolts with the new cams and adjusting plates to give you lifetime camber and caster adjustments.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
With these shims you can correct both rear camber and toe on newer Volkswagens & Audis. By combining the shims (two may be used per wheel) you can get up to +/-.50 degrees toe Our wrench (87530) is a must when installing these shims. It allows you to remove the brake tone ring, bearing, seal and hub assembly as one unit. CAUTION: Check brake & rotor clearance for binding. 75970 spacers may be required.
A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03 degrees toe and .10 degrees camber. CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommend use of 75915 EZ Shim Cutter. 75910 Dial Chart and EZ Shim Online available for setting shims.
A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03 degrees toe and .10 degrees camber. CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommend use of 75915 EZ Shim Cutter. 75910 Dial Chart and EZ Shim Online available for setting shims.
A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03 degrees toe and .10 degrees camber. CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommend use of 75915 EZ Shim Cutter. 75910 Dial Chart and EZ Shim Online available for setting shims.
A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03 degrees toe and .10 degrees camber. CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommend use of 75915 EZ Shim Cutter. 75910 Dial Chart and EZ Shim Online available for setting shims.
A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03 degrees toe and .01 degrees camber. CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommend use of 75915 Shim Cutter. 75910 Dial Chart and EZ SHim Online available for setting shims.
A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03 degrees toe and .01 degrees camber. CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommend use of 75915 Shim Cutter. 75910 Dial Chart and EZ SHim Online available for setting shims.
A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03 degrees toe and .01 degrees camber. CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommend use of 75915 Shim Cutter. 75910 Dial Chart and EZ SHim Online available for setting shims.
A patented Full Contact Dual Angle Shim, that corrects Toe and Camber with one shim. These two-piece adjustable shims are available in 4 sizes which cover many rear shimable FWD vehicles. Durable construction, proven adjustment changes within .03 degrees toe and .01 degrees camber. CAUTION: Check for caliper to rotor clearance when installing this part on vehicles equipped with rear disc brakes. Some vehicles may require the use of longer bolts. Recommend use of 10408 bolts and 75970 spacers as required. Recommend use of 75915 Shim Cutter. 75910 Dial Chart and EZ SHim Online available for setting shims.
We use these cookies to improve your website experience and provide more personalized services to you, both on this website and through other media.
To find out more about the cookies we use, see our Privacy Policy.
We use these cookies to improve your website experience and provide more personalized services to you, both on this website and through other media.
To find out more about the cookies we use, see our Privacy Policy.
