Translucent (see through) polyethylene material enables the user to read the liquid level on the container. Marked in both quarts and liters. The flexible 8" pouring spout enables easy transfer of liquid. The spout is red. 19762 Red Spout & Threaded Collar 19792 Black Ring *From the tip of the spout to back of handle is approx. 18" *The heighth is 13 1/2" *The base measures 8"

Use with a Breaker Bar to Loosen Stubborn Oxygen Sensors. Tool comes with both 1/2 and 3/8 drive. Attach a 1/2 breakerbar on the end of the tool to initially loosen stuck sensors. Usea 3/8 ratchet on the top for fast removal and installation. Fitsoxygen sensor applications with a heat shield. Slotted body allows clearance for wire harnesses. Forged, heat-treated steel with six point design will withstand high torque removal applications. *Made in Taiwan *inside hex: .878 - .885 *SIZE OF THE SOCKET IS 22mm or 7/8"

Set of Four Hose Removers with Many Uses. Contains long and short, standard and offset hooks. Can be used to remove hoses, moldings, clips, clamps, seals, o-rings, cotter pins, gaskets, etc. Long pullers are 13" long. Handles are dual durometer material for comfort and grip. Rods are heat-treated for strength and plated for durability. All hose removers are available individually skin-packed. 80210 Short Hose Remover 80220 Long Hose Remover 80230 Short Offset Remover 80240 Long Offset Remover

Wrench is used to remove and install fuel filter elements on 3.2L Diesel Ford Transit engines. Works on 2015 to current 150, 250, and 350 models. The tool is notched to match the canister design to help eliminate slipping and damage to the canister. To remove the canister housing, slip the tool over the canister and turn the wrench to the unlock position on the canister. To install, apply upward pressure and turn the canister housing to the locked position. The tool aslo has a 3/8" square drive to provide extra leverage.

Provides an Easy Method to Connect a Multimeter to the Vehicle Electrical System to Diagnose Hidden Battery Drain. Replaceable in-line fuses protect both the meter and tester in the event a high current source on the vehicle is left on. The multimeter is bypassed with the switch during connection in case of a power surge. The tester and meter can remain connected until other computer systems shut down, isolating the drain. As a convenience, stacking banana connectors are used on the tester. This allows voltage to be measured on various locations on the vehicle during the drain test, using standard test leads.

Disconnects the Fuel Module on 98 and Later GM Full Size Pickups, Suburban and Tahoe. The 2 piece design allows access to the connectors. Slide the proper size end into the connector. Then rotate and slide the other half in place. Now the module can be disconnected. Fits both 3/8" and 5/16" connector sizes. Will also fit all other 3/8" and 5/16" applications. The tool can be clipped together for convenient storage.