Now Offering Home Delivery in 2 Hours or Less!
Error Storing Vehicle
directions_car close
menu
keyboard_arrow_right
keyboard_arrow_right
1600 Results
Part # G60625-0408 | Line Code: GAH
$6.79
brandNameImage
Female inverted flare to male pipe (inverted flare)
Female inverted flare to male pipe (inverted flare)

Recommended for hydraulic brake, fuel and oil lines, refrigerant in engine, air conditioning, marine and mobile applications. Products for use in LP and natural gas applications require special order. An economical and reusable solution that can be field installed. Threads and seats can be assembled and disassembled for long service life. Tighter tube bends can be achieved using a short nut (brass or steel), whereas a long nut is recommended in applications where excessive, high vibration exists.

Used with copper, brass, aluminum and steel tubing that can be flared.

Meets functional requirements of SAE J512 and specifications/standards of ASA, ASME, SAE and MS (Military Standards). Underwriters Laboratories listed (available special order only) for fuel equipment and gas.

Temperature Range: -65 Deg. F to +250 Deg. F (-53 Deg. C to +121 Deg. C).

Caution: Do not over torque or you may damage the connectors or split the tubing at the flare.

Gates - Driven By Possibility

help
Not Fitted / Universal
Part # G60676-0003 | Line Code: GAH
$2.19
brandNameImage
Female sae 45 flare nut - long (sae flare)
Female sae 45 flare nut - long (sae flare)

Recommended for air, fuel, oil, power steering and water applications. Meets standard industry specifications; therefore, common tooling can quickly form the flared end on the tube to ensure a leak tight connection.

For use with copper, brass, aluminum and steel tubing that can be flared.

Meets ASME and SAE conformance.

Gates - Driven By Possibility

help
Not Fitted / Universal
Part # G49505-0503 | Line Code: GAH
$8.39
brandNameImage
Dual master cylinder adapter (automotive)
Dual master cylinder adapter (automotive)

Recommended for adapting automotive oil filters, carburetors, power steering and fuel lines such as fuel injections, transmission oil cooler and drain plugs. Also used to adapt brake lines to port configurations found in master cylinders or for adapting brake lines to metric sizes.

These adapters have a robust construction with metal-to-metal seats for high heat and fluid compatibility.

For use with copper, brass, aluminum and steel tubing.

Meets SAE and ASME conformance.

Driven By Possibility

help
Not Fitted / Universal
Part # W54234 | Line Code: PTL
$2.49
brandNameImage
Grease gun coupler narrow body
Grease gun coupler narrow body
help
Not Fitted / Universal
Part # G60605-0204 | Line Code: GAH
$3.99
brandNameImage
Male pipe to male pipe hex nipple (pipe adapters)
Male pipe to male pipe hex nipple (pipe adapters)

Recommended for grease, refrigeration and instrumentation. Offered in a large range of sizes and configurations to cover most application needs.

For use with brass, bronze and iron tubing.

Meets ASME and SAE conformance.

Gates Driven By Possibility

help
Not Fitted / Universal
Part # G55100-0804 | Line Code: GAH
$6.89
brandNameImage
Copper tubing industrial to male pipe (copper tubing industrial compression)
Copper tubing industrial to male pipe (copper tubing industrial compression)
Recommended for hydraulic and pneumatic systems. Provides a low cost, easy to assemble solution that does not require flaring.
help
Not Fitted / Universal
Part # G60615-0408 | Line Code: GAH
$7.39
brandNameImage
Male pipe to female pipe - long (pipe adapters)
Male pipe to female pipe - long (pipe adapters)

Recommended for grease, refrigeration and instrumentation. Offered in a large range of sizes and configurations to cover most application needs.

For use with brass, bronze and iron tubing.

Meets ASME and SAE conformance.

Gates Driven By Possibility

help
Not Fitted / Universal
Part # 4K322AP | Line Code: GAT
$8.89
Roadmax
Automotive v-ribbed belt
Automotive v-ribbed belt
help
Not Fitted / Universal
Part # G60637-0204 | Line Code: GAH
$17.99
brandNameImage
Female pipe to female pipe - 90 (pipe adapters)
Female pipe to female pipe - 90 (pipe adapters)

Recommended for grease, refrigeration and instrumentation. Offered in a large range of sizes and configurations to cover most application needs.

For use with brass, bronze and iron tubing.

Meets ASME and SAE conformance.

Gates Driven By Possibility

help
Not Fitted / Universal
Part # G60650-0602 | Line Code: GAH
$4.39
brandNameImage
Male sae 45 flare to male pipe (sae flare)
Male sae 45 flare to male pipe (sae flare)

Recommended for air, fuel, oil, power steering and water applications. Meets standard industry specifications; therefore, common tooling can quickly form the flared end on the tube to ensure a leak tight connection.

For use with copper, brass, aluminum and steel tubing that can be flared.

Meets ASME and SAE conformance.

Gates - Driven By Possibility

help
Not Fitted / Universal
Part # G32154-0604 | Line Code: GAH
$10.99
brandNameImage
Air brake to female pipe - 90 (nylon tubing compression)
Air brake to female pipe - 90 (nylon tubing compression)

Recommended for use in air brake systems - compressed air for suspension, steering, engine transmission or other onboard vehicle applications. For use as a connector on all air brake systems at locations other than between chassis frame and axle or between towed and towing vehicle.

Easy to assemble - field serviceable fitting consists of four component parts.

Meets DOT FMVSS 571.106, SAE J246, SAE J1131, DIN 74324 and German TUV requirements.

For use with SAE J844 and DIN 74324 nylon tubing.

Temperature Range: -40 Deg. F to +200 Deg. F (-40 Deg. C to +93 Deg. C).

Gates - Driven By Possibility

help
Not Fitted / Universal
Part # G38100-0404 | Line Code: GAH
$3.09
brandNameImage
Male pipe nptf with cone seat (barb stem)
Male pipe nptf with cone seat (barb stem)
Recommended for low pressure fuel, oil, compressed air, water and cooling lines. Typically used in heavy-duty truck, construction, industrial and mobile applications. Field attachable and reusable. An economical choice for general purpose fluid and pneumatic applications. The one-piece fitting is compact and great for use in tight spaces.
help
Not Fitted / Universal
Parts Catalog
keyboard_arrow_upBack to Top